Dryer Vent Cleaning in Houston - Flat Price, Airflow Proven on the Day

Trusted Dryer Vent Cleaning for Houston Homeowners

Dryer vent cleaning in Houston typically costs $149-$289 for a standard single-family home and takes 60-90 minutes from arrival to photo documentation. CleanRun Air Duct Cleaning Houston has cleared lint blockages from over 52,000 homes since 2013, and every job starts with a written price delivered before any work begins under Haven Standard Clause 1. Call (346) 251-8919 to schedule a documented inspection - estimates carry no obligation and no per-vent pricing structure.

Call (346) 251-8919

We operate across Houston’s full metro footprint, from the historic bungalows of the Heights to the newer builds in Bellaire and the ranch-style homes of Jersey Village. The Gulf Coast humidity here traps moisture inside vent lines longer than in drier climates, which compresses lint into dense, fire-risk layers that standard consumer brushes cannot dislodge. Our crews document what they find with before-and-after photos of every run, delivered as part of the standard job record.

What Our Dryer Vent Cleaning Service Includes

Dryer Vent Inspection

A proper Dryer Vent Inspection starts with airflow measurement at the exterior termination, not a flashlight glance into the laundry room. We use a digital anemometer to record baseline cubic-feet-per-minute readings, then feed a borescope camera through the full duct run - the metal pathway that carries exhaust from your dryer to outside air - to locate lint accumulation, crushed sections, and improper slope that pools condensation. In Houston’s Energy Corridor and Memorial neighborhoods, we regularly find 90-degree elbows installed too close together, which creates turbulence points where wet lint adheres and hardens.

You’ll receive the inspection findings in writing, including the camera footage and airflow numbers, before any cleaning quote is presented. This is Haven Standard Clause 1: written price before work starts, every time, no exceptions.

Vent Cleaning

Vent Cleaning is the mechanical removal of lint and debris from the full length of the duct run using professional-grade negative-pressure extraction equipment. We deploy Rotobrush systems with reverse-balling capability - a technique that sends a rotating brush head backward through the line to break up compacted lint without pushing it deeper into the system. The debris is captured at our Nikro HEPA-filtered vacuum collection point, not released into your laundry room or attic.

Houston’s clay-heavy soils shift foundations over time, and we’ve documented dozens of cases in Meyerland and Braeswood where that settling has separated duct joints inside wall cavities. Our cleaning protocol includes pressure-testing these connections; if we find separation, we photograph it and present repair options with the same written-price requirement.

Lint Removal

Lint removal addresses the combustible fiber buildup that escapes your dryer’s internal screen and accumulates in the transition duct - the flexible or rigid pipe connecting your appliance to the wall vent - and beyond. In Houston, where many homes run dryers daily through long cooling seasons, we measure lint depth in quarter-inch increments and document the location of heaviest concentration. The transition duct alone often holds 40-60% of total system debris.

We remove lint using agitation tools sized to your duct diameter, followed by high-velocity air whipping that dislodges material from corrugated sections where brushes cannot reach. Everything extracted is collected for your review; we do not consider the job complete until the photo record shows metal surfaces, not gray fuzz.

Vent Rerouting

Vent rerouting becomes necessary when the existing duct path is too long, has too many turns, or terminates in a location that violates International Residential Code Section M1502 - requirements the City of Houston Building Code adopts by reference. A duct run exceeding 35 feet equivalent length (each 90-degree elbow counts as 5 additional feet) cannot achieve adequate airflow even when clean, which extends drying times and accelerates lint accumulation.

We’ve rerouted vents in Montrose townhomes where original construction routed exhaust through two stories of finished wall, and in Pearland subdivisions where builders terminated vents under deck overhangs, recirculating moist air into soffits. Our rerouting includes a written scope, permit guidance when walls are opened, and post-installation airflow verification against manufacturer specifications for your dryer make and model.

Bird Guard Installation

Bird guard installation protects your exterior vent termination from nesting activity, which blocks exhaust flow and introduces organic material that decays inside the duct run. Houston’s year-round mild seasons attract sparrows and starlings to the warm, sheltered cavities that uncapped 4-inch terminations provide. We install Guardsman-brand stainless steel guards with 3/8-inch mesh - small enough to exclude birds and rodents, large enough to maintain proper airflow without creating back-pressure that triggers dryer safety shutoffs.

Installation includes verification that your existing termination hood maintains the required 12-inch clearance above grade (18 inches in flood-prone zones per Houston amendments) and that the guard does not interfere with the damper’s free operation. We photograph the installed guard for your job record.

Vent Cap Replacement

Vent cap replacement addresses cracked, missing, or improperly specified termination hoods that allow rain intrusion, pest entry, or simply fail to open under dryer airflow pressure. Houston’s UV exposure and occasional freeze events degrade plastic caps within 3-5 years; we replace these with galvanized or aluminum hoods rated for exterior use, with integrated dampers that seal when the dryer cycles off.

We stock caps compatible with standard 4-inch round duct and the 6-inch transitions found on some commercial-grade residential dryers. Every replacement includes a new foil tape seal at the duct connection and a damper operation test - documented in your photo record - before we leave the site.

Brands We Service for Dryer Vent Cleaning

We’ve serviced thousands of Whirlpool, LG, Samsung, and Maytag dryers across Houston, and we maintain clearances and connection specifications for each manufacturer’s recommended venting configuration. Whirlpool’s 8-foot maximum flexible transition duct limit, for instance, is frequently violated in Houston’s older homes where laundry rooms were retrofitted into converted garages; we document the existing setup and note any deviation from factory requirements in your written job record. Our crews carry the transition duct materials needed to bring installations into compliance when replacement is elected.

We also regularly clean vent systems serving Bosch condenser dryers (which still require exterior venting for heat-pump models), GE’s newer ULTRAFRESH vent systems, and Speed Queen commercial-grade units installed in some River Oaks and Tanglewood estates. Whether you have a standard electric dryer, a gas unit with combustion-air requirements, or any other make, we can inspect, clean, and document the full vent path to manufacturer specifications. Our equipment roster includes Rotobrush, Nikro, and Abatement Technologies systems - professional-grade tools you can verify independently before agreeing to any scope of work.

Before

After

Signs You Need Dryer Vent Cleaning Right Now

• Clothes take more than one cycle to dry completely. Extended drying time is the most reliable indicator of restricted airflow, and in Houston’s humidity, damp loads left sitting develop mildew odors that transfer to clean laundry. If your typical 45-minute load now requires 70 minutes or a second cycle, lint accumulation has likely reduced airflow below the 1,000+ CFM most dryers require for efficient operation.
• The dryer exterior or laundry room feels unusually hot during operation. Excess heat means your dryer is working harder to push air through a restricted path, and that thermal load radiates into the room instead of exiting through the duct. We’ve measured laundry room temperatures 15-20 degrees above ambient in Houston homes where lint blockage exceeded 70% of duct cross-section.
• You smell burning or musty odors near the dryer. Lint is highly combustible; the Consumer Product Safety Commission attributes approximately 2,900 residential fires annually to dryer vent failures. Musty smells indicate moisture trapped behind lint dams, a condition we find frequently in Houston’s spring months when Gulf moisture peaks and poorly vented systems cannot dry between cycles.
• Visible lint accumulates around the interior wall vent or exterior termination. Lint escaping at connection points signals that the duct run is full enough to create back-pressure, forcing debris through gaps that should be sealed. In Houston’s newer construction, we also find builder-grade foil flex duct that has sagged between joists, creating low points where lint deposits and eventually overflows at the seams.
• It’s been more than 12 months since professional cleaning, or never. The National Fire Protection Association recommends annual inspection and cleaning of residential dryer vents. For Houston households running 5+ loads weekly - common with young families in Sugar Land, Missouri City, and Cypress - we recommend 9-month intervals based on documented accumulation rates in our photo records.

Our Dryer Vent Cleaning Process - Step by Step

1. 1
   Arrival and written price confirmation. Your technician arrives in a marked CleanRun vehicle, uniformed and identified by name per Haven Standard Clause 3: Verified Crews. We review the scope discussed during scheduling, confirm the written price on our tablet, and obtain your authorization before touching any equipment. No work begins without this documented agreement.
2. 2
   Airflow baseline and exterior inspection. We measure exterior termination airflow with a digital vane anemometer and inspect the termination hood for damage, proper clearance, and pest intrusion. In Houston, we frequently find terminations blocked by landscaping mulch, painter’s overspray, or previous owners’ DIY screening that violates manufacturer airflow specs.
3. 3
   Borescope camera inspection of full duct run. A flexible camera transmits real-time video from inside the duct, revealing lint depth, joint separation, slope problems, and any construction debris left from original build-out. You may view this feed alongside the technician; we also capture still images for your permanent job record.
4. 4
   Mechanical cleaning with negative-pressure extraction. Using Rotobrush or Nikro equipment matched to your duct diameter and material, we agitate and extract lint from the full run. Transition ducts are removed and cleaned separately or replaced if deteriorated. We verify cleanliness with a post-cleaning camera pass - the photo record shows metal surfaces, not residual debris.
5. 5
   Airflow verification, photo documentation, and written completion. Final airflow measurement must meet or exceed baseline; if it does not, we locate and resolve the restriction before departure. Your deliverables include: before-and-after photos of every duct section, airflow readings, a written scope completion statement, and the 365-Day Done Right Promise documentation. Payment is processed only after you review and accept these materials.

How Much Does Dryer Vent Cleaning Cost in Houston?

Dryer Vent Cleaning Near Houston - Our Service Area

CleanRun crews operate throughout Harris County and adjacent jurisdictions, with regular routes to Bellaire, Jersey Village, Stafford, Pearland, Humble, Pasadena, Missouri City, Deer Park, Fresno, Atascocita, and Sugar Land. Most Houston metro appointments are scheduled within a 3-day window; same-week availability is typical for standard cleaning requests. We do not charge travel fees within our published service area, and we do not upsell based on distance from our dispatch point.

Homes in outlying areas like Katy, Cypress, and The Woodlands fall within extended routing; call to confirm current scheduling. For properties in flood-prone zones near Buffalo Bayou or Brays Bayou, we also inspect for water intrusion damage to ductwork that may affect cleaning approach or require repair referral.

Frequently Asked Questions - Dryer Vent Cleaning in Houston

Schedule Your Dryer Vent Cleaning Service in Houston Today

Call (346) 251-8919 to speak with a live person, request a free written estimate, or schedule your documented dryer vent cleaning. Every appointment includes a written price before work starts, borescope camera inspection with photo record, and the 365-Day Done Right Promise backed in writing. No per-vent pricing. No post-arrival upsells. Just documented results you can verify.

Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Houston, serving Houston since 2013.