Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies HVAC Cleaning in Houston: What to Know First
We provide independent Abatement Technologies HVAC cleaning in Houston for homeowners who want the work documented, not guessed at. A typical Abatement Technologies evaporator coil or air handler cleaning runs $340-$620 depending on access and contamination level, and we deliver a written price before touching a single panel. Most jobs are completed in a single visit with before-and-after photos of every component we clean.
This page is for Houston homeowners with Abatement Technologies equipment in their attic, closet, or mechanical room who have noticed weak airflow, musty output, or a coil that ices over in summer. If that’s your situation, call us at (346) 251-8919. We’ll schedule a free inspection, show you what the camera found, and put a flat price in writing before any work begins.
How Abatement Technologies Products Fail - and How We Fix Them
- Portable HEPA-AIRE units (PAS2400, PAS5000 series): These negative-air machines see heavy use in Houston’s post-remediation market, and the blower motors collect drywall dust and microbial residue that standard filter changes miss. We disassemble the blower housing, clean the fan blades with compressed air and contact-safe solvents, and photograph the amp draw before and after to verify the motor isn’t working harder than it should.
- Abatement Technologies HEPA filtration modules (H2000, H5000 lines): The pleated media frames warp in Houston attic heat above 140°F, creating bypass gaps that let unfiltered air recirculate. We check frame squareness with a straightedge, replace warped retainers with OEM-spec aluminum channels, and document the seal with a smoke pencil test.
- Predator 600 portable air scrubbers: The variable-speed control boards fail when condensate drips from the coil onto the electronics housing, a common issue in Gulf Coast humidity when the drain pan slopes are off by even a quarter-inch. We clean the coil, verify the pan pitch with a level, and treat the board housing with a moisture barrier service.
- Abatement Technologies duct-mounted HEPA systems (DCH series): The isolation dampers stick closed after years of Houston’s pollen seasons, starving the downstream duct runs of airflow. We remove the damper actuators, clean the blade pivots, and cycle them through full travel twenty times before reassembly to prove free movement.
- Evaporator coils in Abatement Technologies air handlers (AHC series): The aluminum fins oxidize faster in Houston’s coastal air than inland specs account for, reducing heat transfer and raising head pressure. We use a foaming cleaner with a pH between 7 and 8, never acidic brighteners that void the coil warranty, and fin-comb any bent areas to manufacturer pitch.
Our Abatement Technologies HVAC Cleaning Process
- 1
Inspection with photo documentation. We remove the access panel and photograph the coil, blower, and plenum conditions before touching anything. The photo goes first. The pitch comes later, if it’s warranted.
- 2
Written scope and flat price. Using Haven Standard Clause 1, we deliver a single price for the complete cleaning, not a per-vent or per-component meter. You approve it in writing or we pack up, no charge.
- 3
Component-specific cleaning. For Abatement Technologies equipment, we match the cleaning method to the manufacturer’s materials: non-acidic foams on coated coils, low-pressure negative-air on HEPA housings, contact-safe solvents on electronics-adjacent surfaces.
- 4
OEM or verified-equivalent parts only. If a frame, gasket, or actuator needs replacement, we source Abatement Technologies OEM or cross-referenced quality equivalents, never generic hardware-store substitutions that compromise the seal or void remaining warranty.
- 5
Performance verification and photo record delivery. We run the system through a full cycle, check temperature split and static pressure, and deliver your documented photo record showing every component before and after. The 365-Day Done Right Promise attaches in writing.
BeforeAfterWhat Abatement Technologies HVAC Cleaning Costs in Houston
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Evaporator coil cleaning (AHC series) | $340-$480 | Access difficulty, fin oxidation severity, whether the drain pan needs removal |
| Blower motor & housing cleaning (PAS/H series) | $280-$420 | Single-speed vs. variable-speed, bearing condition, housing disassembly depth |
| Full air handler cleaning (coil, blower, plenum) | $520-$620 | System size, contamination level, filter rack condition |
| HEPA module service (H2000/H5000/DCH) | $180-$340 | Media replacement vs. frame-only cleaning, damper actuator testing |
These are whole-system prices, not teaser rates that balloon once we’re on site. Every estimate is free, every price is written, and every job includes the documented photo record. Call (346) 251-8919 to schedule.
Why Houston Homeowners Call CleanRun Air Duct Cleaning Houston for Abatement Technologies Work
We’ve cleaned Abatement Technologies equipment in Houston since 2013, from post-flood remediation setups in the Energy Corridor to dedicated HEPA systems in Meyerland rebuilds. Tomas Reyes, who leads our operation, spent years in the northeast before relocating here and has a working knowledge of how Gulf Coast humidity accelerates the failure modes these units were designed for.
Our technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews. We also service Lennox, Trane, and Carrier systems, so when an Abatement Technologies unit is integrated with a mixed-manufacturer setup, we don’t guess at the interfaces. The 365-Day Done Right Promise, the written price guarantee, and the documented photo record apply to every job, not just the ones that go smoothly.
FAQs
No. As an independent Abatement Technologies service provider, we use manufacturer-specified cleaning methods and pH-neutral products that satisfy warranty maintenance requirements. We document our process with photos in case a warranty claim arises later. If you have concerns about a specific unit’s warranty status, call (346) 251-8919 and we’ll review the serial number against the manufacturer’s current terms.
We replace when the heat exchanger is cracked, the coil is leaking refrigerant at multiple points, or repair costs exceed 60% of replacement value. Everything else, we clean and restore. During our free inspection, we’ll show you the photos and explain which category your unit falls into, with a written price for either path. Call (346) 251-8919 to schedule.
Most H2000, PAS, and DCH series parts remain available through distribution, though some actuator and control board models have been superseded. We cross-reference OEM numbers to verified-equivalent replacements when originals are discontinued, and we never install a part we can’t warranty for twelve months. For availability on a specific model, call (346) 251-8919 with your serial number.
Every three to five years for typical residential use, but every eighteen to twenty-four months if the system ran during a flood event, renovation, or visible mold remediation. Houston’s pollen load and humidity compress that interval for outdoor-facing intakes. We inspect for free and tell you whether it’s time or whether you can wait.
A complete photo record of every component before and after, the written scope of work with your approved price, and the 365-Day Done Right Promise in writing. These are standard deliverables on every job, not add-ons. You’ll have them in hand before our truck leaves your driveway.
Ready to see what’s actually inside your Abatement Technologies system? Call (346) 251-8919 for a free inspection and written estimate. We’ll show you the photos, name the flat price, and let you decide.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Houston at CleanRun Air Duct Cleaning Houston, serving Houston and nearby areas.