Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Carrier Air Duct Cleaning in Houston, TX | CleanRun Air Duct Cleaning Houston
Carrier air duct cleaning in Houston typically runs $450-$850 for a whole-home system and includes a documented photo record of every duct run. What makes our Carrier work different here is the humidity: Houston’s 70-75°F summer dew points turn every unsealed joint into a condensation point, so we clean and seal in the same visit or the mold comes back. Call (346) 251-8919 for a written estimate before any work starts.
Why Houston Residents Choose Us for Carrier Service
We’ve worked on Carrier equipment since the early 1990s, from legacy 38EQ and 24ABB condensers to the current Infinity and Performance lines. That history matters in Houston attics, where a technician who doesn’t know Carrier’s coil-temperature profiles can clean ducts beautifully and still leave the root problem untouched.
Tomas Reyes, our owner, grew up in the Bronx and learned HVAC fundamentals at Bronx Community College before doing hands-on duct work across the northeast. He relocated the operation to Houston and has since put in the hours across neighborhoods like the Energy Corridor, where older commercial builds and residential retrofits showed him how Gulf Coast humidity turns a mildly dusty duct into a debris problem faster than most homeowners expect. He’s spent well over a decade in Air Duct Cleaning - Houston specifically. The thing he’s known for is showing customers the inspection photos before recommending a single service. The photo goes first. The pitch comes later, if it’s warranted.
As an independent shop, we are not affiliated with, authorized by, or endorsed by Carrier Corporation. We simply know their equipment better than any other brand we see in Houston homes. We stock OEM Carrier-equivalent flex connectors, mastic, and coil treatments locally, and we will not substitute generic foil tape for a proper mechanical connector on a Carrier trunk line. Every job is quoted with a written price before work begins, under Haven Standard Clause 1. No exceptions.
Common Carrier Air Duct Cleaning Problems We Solve in Houston

- Condensate-prone supply trunks. Carrier evaporator coils run a low coil temperature that works fine in dry climates. In Houston’s high-dew-point air, any duct leakage onto the cold trunk line produces standing moisture and mold growth rather than just dust staining. We find this on Infinity and Performance systems in Spring Branch and Alief ranch homes where attic flex meets the plenum.
- Mastic-seal failure in attic flex runs. Original Carrier-era flex duct connectors secured with mastic fail at 140-160°F attic temperatures, common in Houston’s unconditioned attics. The mastic cracks, and blown insulation fibers enter the supply stream, loading the Carrier coil with debris that looks like duct dust but isn’t. We replace these with mechanically sealed connectors that survive the thermal cycle.
- Variable-speed air handler over-humidification. Infinity or Performance variable-speed blowers set to constant fan keep the coil wet between cycles. In Houston, where the return side already runs humid, this makes the return duct the primary mold reservoir. We check blower programming and coil drainage as part of every Carrier cleaning.
- Post-flood flex liner contamination. In Meyerland, Kingwood, and parts of the Energy Corridor, Carrier systems installed before 2017 may still have Harvey-submerged flex duct liners. They look intact from the outside. Inside, they test positive for sewage-associated mold species and bacterial contamination. Our video inspection finds what visual checks miss.
- Coil fouling from attic debris. Once mastic fails and insulation loads the coil, Carrier’s tight fin spacing traps fibers that a standard duct cleaning never reaches. We pull and clean the evaporator coil when it’s fouled but structurally intact, and we tell you plainly when the fin pack or drain pan is corroded through and replacement is the honest call.
Before
AfterCarrier Service in Houston: What Local Conditions Mean for Your Equipment
Houston’s subtropical humidity averages above 70% relative humidity year-round, and most homes run cooling 10 to 11 months continuously. That creates repeated condensation cycles inside ductwork, making microbial contamination the primary concern rather than simple dust accumulation. Unlike drier Sun Belt cities, Houston ducts face near-constant biological growth risk, which means cleaning without antimicrobial treatment is often inadequate.
Here’s the specific Houston factor that shapes our Carrier work: dew points of 70-75°F in summer mean a Carrier supply trunk that runs through an unconditioned Houston attic will condense moisture on any unsealed joint every single cooling cycle. A duct cleaning without sealing is a repeat visit waiting to happen in this city. It would not be true in a dry market like Phoenix. In a 1970s ranch in Meyerland, we pulled a Carrier 40MBC fan coil whose supply plenum was still carrying Harvey-era flex liner, and the video inspection showed black microbial growth inside a connector the homeowner had never seen. We cut out the failed mastic joints, replaced the flex connectors with mechanically sealed ones, cleaned the evaporator coil, and applied an antimicrobial treatment to the trunk line. The post-job air sample dropped from a heavy mold count to a normal outdoor-baseline range, and the homeowner finally stopped smelling the attic every time the Carrier started.
This is why our Carrier sales & service approach includes sealing as standard, not an upsell. The climate here doesn’t give you a choice.
Carrier Models & Products We Service in Houston

We service the full Carrier residential line:
- Infinity series: Two-stage and variable-speed condensers including 24ANB and 24VNA models, with their matched variable-speed air handlers.
- Performance series: Single-stage condensers including 24ACC and 24ABB, plus earlier generations still running in Houston homes.
- Comfort series: Straight-cool and heat pump units, common in 1990s-2000s builds across Pasadena and Alief.
- 40MBC/40MBQ fan coils and variable-speed air handlers: Frequently paired with heat pumps in Houston’s all-electric subdivisions.
We stock OEM Carrier-equivalent parts locally for fast turnaround: flex connectors rated for Houston attic temperatures, mastic formulated for high-humidity cure conditions, and coil treatments compatible with Carrier’s aluminum fin stock. When we find a Carrier coil that is fouled but structurally intact, we clean and treat it. When the fin pack or drain pan is corroded through, we tell you plainly that replacement is the honest call rather than selling a cleaning that will not hold.
Carrier Service Pricing in Houston
Whole-home Carrier air duct cleaning in Houston typically ranges from $450 to $850, depending on system size, accessibility, and whether coil treatment or duct sealing is needed. Here’s how that breaks down:
| Service | Price Range |
|---|---|
| Whole-home duct cleaning (standard system, 1-2 returns) | $450-$650 |
| Whole-home duct cleaning (larger system, 3+ returns) | $650-$850 |
| Evaporator coil cleaning (pulled and treated) | $180-$280 |
| Duct sealing (mechanical connectors, mastic, pressure test) | $250-$450 |
| Antimicrobial treatment (recommended in Houston humidity) | $120-$180 |
What drives cost: system age (older Carrier flex duct takes longer to access safely), attic temperature conditions in summer (we schedule morning slots when possible), and whether Harvey-era flex liner needs replacement rather than cleaning. Every estimate includes the documented photo record of every duct run, before and after, delivered as part of the standard job record. No per-vent pricing. No teaser coupons. One flat price per system, agreed in writing before work starts, under Haven Standard Clause 1. Call (346) 251-8919 for an exact quote - estimates are free, and we provide a Free Second Opinion on any competitor’s written estimate.
Serving Houston, TX - Our Local Coverage Area

We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Carrier Air Duct Cleaning in Houston
It’s usually both, but the air handler is the source. Infinity and Performance variable-speed blowers set to constant fan keep the evaporator coil wet between cycles. In Houston’s humidity, that moisture migrates to the return plenum and grows mold there first. We inspect both with a video scope and treat the coil, plenum, and return trunk as a single system. Call (346) 251-8919 for an exact quote - estimates are free.
No manufacturer recall applies to ductwork specifically. The issue we see is design-environment mismatch: Carrier’s low coil temperatures and tight fin spacing work well in dry climates but require more frequent coil cleaning and better duct sealing in Houston’s humidity and attic heat. This is not a defect; it’s a maintenance reality we account for in our scope. Call (346) 251-8919 for an exact quote - estimates are free.
Metal duct and rigid fiberglass board can often be cleaned and treated if structurally sound. Flex duct with a permeable liner that was submerged is different: the liner absorbs contaminants and cannot be reliably restored. We video-inspect first and show you what the camera finds. Replacement is the honest call for permeable flex that tested positive for sewage-associated mold. Call (346) 251-8919 for an exact quote - estimates are free.
It will lower your bill, but the more urgent issue in Houston is what unsealed joints cost in mold remediation and coil replacements. A typical Houston attic at 140-160°F pulls conditioned air out through every leak, and pulls hot, humid attic air in on the return side. Your system runs longer to hit setpoint. We pressure-test after sealing and show you the before-and-after leakage rate in writing. Call (346) 251-8919 for an exact quote - estimates are free.
Coil cleaning every 2-3 years, full duct cleaning every 4-5 years, with the caveat that Houston humidity and attic heat can accelerate both timelines. If you run your Carrier Infinity or Performance blower on constant fan, or if you’ve had any duct leakage or flood history, inspect annually. We include coil condition in every duct cleaning scope and will tell you if the coil needs attention before the ducts do. Call (346) 251-8919 for an exact quote - estimates are free.
Service Areas Near Houston

We serve Houston service area homeowners across the metro, including Carrier service in Bellaire, Carrier service in Jersey Village, Stafford, Pearland, and Humble. Whether your home is a 1960s ranch in Spring Branch with original flex duct or a newer build in the Energy Corridor with a variable-speed Infinity system, we carry the equipment and the Houston-specific experience to document what we find and fix what we quote.
Book Your Carrier Service in Houston Today
Call (346) 251-8919 to speak with a live person and schedule your free estimate. Every Carrier job starts with a written price before work begins, includes a documented photo record of every duct run, and is backed by our 365-Day Done Right Promise. Background-checked, uniformed technicians under Haven Standard Clause 3: Verified Crews. Equipment from Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman - names you can verify before we arrive.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Houston, serving Houston since 2013.




Before
After
Before
After